question

Amit Kulkarni avatar image
0 Likes"
Amit Kulkarni asked Amit Kulkarni commented

Stack Pallets with Loads - Pallet Packing Method

I want to stack tow pallets with single load on each pallet like shown in the picture below

1624372869625.pngStack Pallets

However, it seems that if I use a dummy pallets to pack, it makes them stack like this


1624372972390.pngUsing dummy pallets

I am using "Simple" packing method on the dummy pallet.

I am using a dummy pallet because this stacked load gets separated downstream using a separator.

What is it that I am missing? Probably adjust the spatial offsets?

Pallet_Stacking.fsm


FlexSim 21.1.4
combinerpallet packing method
1624372869625.png (311.7 KiB)
1624372972390.png (1003.3 KiB)
pallet-stacking.fsm (46.7 KiB)
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

1 Answer

·
Eric M avatar image
0 Likes"
Eric M answered Amit Kulkarni commented

Hi @Amit Kulkarni, you should be able to get away with not using the dummy pallets. I just added 2 connections from the conveyor to the combiner and changed the combiner packing list to be 1. Then I updated the "pallet" flowitem pack contents to be simple. They stack and separate just fine now.

pallet-stacking (1).fsm


pallet-stacking-1.fsm (46.6 KiB)
· 1
5 |100000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Amit Kulkarni avatar image Amit Kulkarni commented ·
Thank you! I had completely forgotten that we can have two connectors to a combiner from the same object!
1 Like 1 ·

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.