Hi Everyone,
Currently my simulation is doing single pick order and after which they will go quality check(QC), however after the operator move 3 times, it will stop working, can anyone assist in helping me resolve this issue.
Thank you so much!!
As I have already mentioned in my last comment to your other question, the issue is that pallets are removed from the processors before the process time has elapsed. The 'process finish' event stays scheduled and due to the missing item an error occurs and the process is not correctly stopped. If the process used an operator that might get it stuck.
The processors in your model have different settings (difference process times, some use an operator while others don't), so I don't know how the process is supposed to work. The easiest fix would be to set the process time to 0.
In the attached model I also fixed the label assignment in the sources.
Hi Felix,
Thank you for your help, may i know how i should proceed if i got this set of process time data for each of the different processes such as picking, qc and outbound, do i apply it to the entities themselves or the process flow?
Thank you!
As I said, wait for the processor to finish processing before the pallet is removed.
Hi Felix,
I have adjusted my baseline model, however now it will stop generating orders after like 6000ish seconds and causes my output to be lesser than expected, May i know why this is the case?
16 People are following this question.
