Paul Toone avatar image
Paul Toone posted

Global Modeling Tools Tutorial Introduction   

This lesson will introduce the basic concepts of global modeling tools that can be used throughout your model. These properties can simplify views and enable dynamic changes in your model. We will also look at ways to use a Combiner and Separator in order to better model situations that may happen in real life.

Note: For more information on global modeling tools, see the Modeling Tools section.

What You Will Learn

New Objects

In this lesson you will be introduced to the Combiner and Separator objects.

Conveyor Module Required
This lesson requires the conveyor module. If you do not have this module, you can download and install if from the main menu under Help > Online Content.

Approximate Time to Complete this Lesson

This lesson should take about 45-60 minutes to complete.

Model Overview

In this model we’re going to look at some different ways of accomplishing tasks as opposed to how they have been done in previous lessons. Both methods give the same result, but some users prefer one way over the other.

We’ll also take a look at Combiners and Separators and how they can be used in your models.

Click here for the Step-By-Step Tutorial.

flexsim users manual
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.



paul.t contributed to this article


FlexSim 2016.1