Maximum Content - The maximum amount of material that this object can hold.
Loss Amount - A value between 0 and 1 that represents the percentage of material that is lost going through the Processor. This loss could be due to evaporation, inefficiency or many other factors. A value of 0 means that there is no material lost, a value of 1 means that all material is lost. This loss is applied as soon as material is pulled into the Processor.
Receive Port - If this field returns a 0, the Processor will receive material from all input ports. If it returns a number greater than zero, the Processor will only receive material from that input port.
Destination Port - If this field returns a 0, the Processor will allow material to leave from all of its output ports. If it returns a number greater than zero, the Processor will only allow material out that output port.
Input Ports
There is no input information the modeler has to define.
Output Ports
These properties affect how the object sends material to downstream objects.
Maximum Output Rate - The maximum rate that material will leave this object through all of the output ports combined. The actual rate will be determined by the rate of material coming into the Processor.
