article

Paul Toone avatar image
0 Likes"
Paul Toone posted

NetworkNode Page   

For more detailed information on these fields, see thenetworknode documentation.

Maximum Travelers at Node - This number defines how many transporters that are not traveling on the network can be stationed at the node. This would represent the transporters that are not currently executing a travel task, but are doing other things while "stationed" at the node.

Side Offset - This number defines a distance to the right of outgoing paths that travelers will be offset. It does not affect the distance that the traveler travels, but is purely for visual purposes, so travelers going in different directions along the same path don't run over each other.

Paths

Note on networknode connections: Each path between two networknodes contains two one-way connections. This page defines behavior only for the connections extending from this networknode to other networknodes. If you would like to edit behavior for connections extending from other networknodes to this networknode, then open the Properties window of those other nodes.

Name - This field allows the user to name each connection in the network. These names should be descriptive of any special purpose this connection has in the model.

Connection Type - This drop-down list allows the user to define how this connection behaves. There are three options.

No Connection - Transporters cannot travel on this connection. The connection is drawn in red in the view window.

Passing - Transporters are allowed to pass each other on this connection. The connection is drawn in green in the view window.

No Passing - Transporters will not pass each other on this connection. The minimum distance between transporters on the path can be set by the user in the Spacing field of the dialog. These connections are drawn in yellow in the view window.

Spacing - This number determines the minimum distance allowed between two transporters on a connection that is designated as no passing. This is the distance from the back of one traveler to the front of the traveler behind it.

Speed Limit - This number determines the maximum speed that a traveler can travel along this connection.

Current Distance - This number shows you the current distance that is being simulated for that connection. If the virtual distance is specified as 0, then it will be the actual distance of the spline path. Otherwise it will be the distance that is specified in the virtual distance field.

Virtual Distance - This number let's you specify an exact distance for the connection.


This Page is Used By

networknode



flexsim users manual
5 |100000

Up to 12 attachments (including images) can be used with a maximum of 23.8 MiB each and 47.7 MiB total.

Article

Contributors

paul.t contributed to this article

Navigation

FlexSim 2016.1